[Largeformat] Re: Wista and Zone VI

["Ken Hough" <k4sb@niia.net>]

From: "Ken Hough" <k4sb@niia.net>

It was soldered on with soft solder. It has to be silvered soldered. BUT you see those 2 
screws on the side on each side of the rod ? They are fake.  The entire assembly is soldered 
together and is then brass plated and is a pain to fix and make look like new.
Ken Hough

From:           	"Frank Filippone" <red735i@earthlink.net>
To:             	<Largeformat@onelist.com>
Date sent:      	Thu, 31 Dec 1998 23:16:22 -0800
Send reply to:  	Largeformat@onelist.com
Subject:        	[Largeformat] Wista   and Zone VI

> From: "Frank Filippone" <red735i@earthlink.net>
> 
> Does anyone know how to get a rear focusing gear, shaft, knob, etc assembly?
> My 8x10 Wood Field Camera hs had the gear separate from the shaft, making
> back focusing implssible.
> 
> Who and Where is the Wista repair station in the USA?
> 
> 
> Zone VI has updated their WEB page.... check it out....
> 
> Thanks
> Frank
> 
> 

> 


******Ken Hough Photographic Repair******
  Specializing in Deardorff Refinishing
   Lens Recementing and Shutter repair
   Contribitor to McKeowns Price Guide
           Deardorff Section
   Custom machined Photographic items
                Est. 1980